LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps - 911 CARRERA (992) >> WM, 558419 Removing And Installing Rear Lid Release Motor >> Removing Rear Lid Release Motor

Removing Rear Lid Release Motor

G14263847Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position

  1. Loosen rear lid-release motor.
    G14263848Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lid-release motor, rear

    1. 1.1  Loosen screws
    2. 1.2  Push rear lid-release motor -2-  upwards. -arrow A- 
    3. 1.3  Disengage rear lid-release motor -2-  . -arrow B- 
  2. Swivel rear lid-release motor downwards -1- -arrow- 
    G14263849Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lid-release motor, rear

  3. Disengage rear lid-release motor.
    1. 3.1  Push operating cable -1-  towards the motor. -arrow- 
    G14263850Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Operating cable for rear lid-release motor

  4. Unclip operating cable -1-  (-arrow A-  ) and disengage rear lid-release motor -2-  (-arrow B-  ).
    G14263851Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Operating cable for rear lid-release motor