LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps - 911 CARRERA (992) >> WM, 558419 Removing And Installing Rear Lid Release Motor >> Installing Rear Lid Release Motor

Installing Rear Lid Release Motor

  1. Installation is performed in reverse order.
  2. Tighten screws to > Tightening torque 2.5 (1.75 ft.lb) Nm + 0.5 (0.3 ft.lb) Nm  .
scientia non olet · About LEMON Manuals