Removing Front Lid
Information
The help of a second person is required for the following steps.
Installation position
- Position container for catching emerging washer fluid under the area near the hose locking mechanism for the washer fluid line.
- Unclip spray nozzles -1- (-Arrows-
).
Spray nozzles
- Push out the clamp -1-
on the hose locking mechanism using a screwdriver -arrow A-
and disconnect washer fluid hose -arrow B-
.
Hose locking mechanism
- Unclip cover on hinge -1-
using a plastic wedge and remove it.
Cover on hinge
- Pull grommet for washer fluid line -1-
out of the lid -arrow-
and pull the line completely out of the front lid.
Grommet for washer fluid line
- Unscrew nuts on front lid hinge.
Nuts on front lid hinge
- Remove front lid.