Adjusting Front Lid

Fig 1: Front Lid Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position

1. Check gap dimension between lid -1-  and body.

   > 5X00IN GAP DIMENSIONS

   Fig 2: Checking Front Lid Gap Dimension

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Gap dimension for front lid

2. Unclip cover on hinge -1-  using a plastic wedge and remove it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover on hinge

3. Loosen nuts -1-  on the front lid hinge -2-  until the front lid can be moved.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening nuts on front lid hinge

4. By moving the front lid at the hinges, adjust the contours with respect to the wings, headlights and front apron.

   > 5X00IN GAP DIMENSIONS

5. Tighten nuts -1-  on the front lid hinge -2-  to > Tightening torque 8 (6 ft.lb) Nm  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tightening nuts on front lid hinge