Preparing (Inner) Rear Wheel Housing For Installation

Fit in (inner) rear wheel housing with corner panel and secure it to the body.
Drill bore holes for blind rivets.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

> diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for rivets
Drill bore holes for blind rivets.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

> diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for rivets
Remove (inner) rear wheel housing with corner panel.
Prepare marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Marked areas