Removing (Inner) B-Pillar Reinforcement (Cabriolet)

Unscrew self-tapping screw -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screw
Grind down welded seam -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seam on B-pillar (Cabriolet)
Bend up seam -2- using crimping pliers set > VAS 6635 - Crimping pliers set, 4-piece .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seam on B-pillar (Cabriolet)
Heat bonding areas using > V.A.G 1416 - hot-air blower.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove B-pillar reinforcement (Cabriolet).