Preparing Hinge Pillar For Installation

Drill holes for blind rivets. > Diameter 6.5 mm

1.1 Sink holes for blind rivets.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes

Drill through hole for blind rivets. > Diameter 6.5 mm .

2.1 Sink hole for blind rivets.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Spotwelds

Prepare marked areas for bonding, resistance spot-welding and full steel welding.

3.1 Prepare area -A- for bonding and resistance welding.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

3.2 Prepare area -B- for full steel welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

Prepare marked area for applying a full steel weld.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding areas