Removing Reversing Camera
- Cut and remove tie-wrap -1- .
- Unclip electric plug connections -2-
from the holder on the rear apron.
Unclipping electric plug connections
- Release electric plug connections -1-
(-a-
) and disconnect them.
Disconnect the electric plug connections
- Disengage locking mechanisms -1-
on the cap -2-
in direction of arrow and remove cap.
Removing cap
- Remove reversing camera -1-
from the bracket -2-
.
Removing reversing camera
- Release bracket -1- if necessary -a- and press it to the rear and out of the rear apron.
Removing bracket