LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 Lights, Lamps, Switches Exterior -- 992 - 911 CARRERA (992) >> WM, 943115 Adjusting Tail Light >> Installing Retainer Mount

Installing Retainer Mount

  1. Installation is performed in reverse order. Pay particular attention to the following:

    After assembly of the compensating element in the retainer mount and installation in the vehicle, the end position of the rotary part must be checked. The rotary part of the compensating element must be screwed in as far as the stop (zero position) in direction of arrow or it must be checked that this is the case.

    Tighten fastening screw to > Tightening torque 6 Nm (4.5 ftlb.)  .

scientia non olet · About LEMON Manuals