Removing Carbon Canister
WARNING: This page is about a different variant/trim than selected.
- Disconnect carbon canister -1
-.
- 1.1 Unscrew and remove fastening screw -3 -.
- 1.2 Remove carbon canister -1 - as far as required until the plug-in couplings -2 - are accessible.
- 1.3 Release plug-in couplings -2 - using a suitable tool.
- 1.4 Pull off plug-in couplings -2 -.
- Loosen carbon canister -1
- from the mounting -arrow
-.
- Pull off vent line -1
- and remove carbon canister.