Removing Rear Apron
- Disconnect wiring harness for ParkAssist -1-
.
- 1.1 Unclip plug connection for ParkAssist.
- 1.2 Release and disconnect plug connection for ParkAssist.
- Disconnect wiring harness for reversing camera -1-
.
- 2.1 Unclip plug connection for reversing camera.
- 2.2 Release and disconnect plug connection for reversing camera.
- Unscrew fastening screws at the bottom -1-
.
- Unscrew lower fastening screws at the centre -1-
.
- Unscrew fastening screws in wheel housing -1-
.
- Unscrew fastening screws at the top -1- and remove rear apron -arrow- .