LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 982 - BOXSTER/CAYMAN >> WM, 635719 Removing And Installing Rear Retaining Strip >> Installing Rear Retaining Strip

Installing Rear Retaining Strip

  1. Fit rear retaining strip -2-  and slide it up -A-  until the retaining strip is touching the side panel.
    G14954390Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Fastening screws
    2. Rear retaining strip
  2. Screw in and tighten fastening screws -1-  to > Tightening torque 7 Nm (5.2 ftlb.) + 0.7 Nm (0.5 ftlb.) - 1 Nm (0.7 ftlb.)  .
scientia non olet · About LEMON Manuals