LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 982 - BOXSTER/CAYMAN >> WM, 635519 Removing And Installing Rear Apron >> Installing Rear Apron

Installing Rear Apron

  1. Installation is performed in reverse order to removal.
  2. Check that parts are fitted correctly during installation.

    > 5X00IN GAP DIMENSIONS

  3. Tighten fastening screws at the top to > Tightening torque 3.2 Nm (2.4 ftlb.)  .
  4. Tighten fastening screws in wheel housing to > Tightening torque 3.2 Nm (2.4 ftlb.)  .
  5. Tighten lower fastening screws at the centre to > Tightening torque 4.5 Nm (3.3 ftlb.)  .
  6. Tighten lower fastening screws to > Tightening torque 3.2 Nm (2.4 ftlb.)  .
scientia non olet · About LEMON Manuals