Removing And Installing Front Apron
- Unscrew and remove screws -2-
at the bottom of the front apron -1-
.
- Unscrew and remove screws -2-
at the left and right sides of the front apron -1-
.
Information
- A tight hose can be pulled off more easily after heating it with a hot-air gun.
- Collect washer fluid in a suitable container.
Information
- Only for vehicles with headlight cleaning system.
- Unclip washer-fluid hose -1-
from the body in the left wheel housing area and disconnect it.
- Disconnect electric plug connection -1-
in the left wheel housing.
- Disconnect electric plug connections -1-
in the right wheel housing.
- Carefully lift up covers in the headlight area and loosen locking mechanisms -1-
using > T10118 - assembly tool
.
- Unscrew and remove screws -2-
at the top of the front apron -1-
.
Information
The help of another person is required.
- Remove front apron -1-
.
- Installation is performed in reverse order.