Subsequent Work

WARNING: This page is about a different variant/trim than selected.

WARNING: Toxic exhaust gases

Risk of suffocation
- forward Before starting the engine, position an exhaust extraction system behind the vehicle's exhaust pipes and switch it on.

Move selector lever at the selector support from position "P" to "D", then from position "D" to "N" and back again several times.
Check parking lock.
1. 2.1 Insert ignition key into the ignition lock.
2. 2.2 Move selector lever to position "P". Check that "P" is displayed in the instrument cluster.
3. 2.3 Press the brake pedal.
4. 2.4 Start the engine.
5. 2.5 Release the brake pedal.
  - If the vehicle does not move forward, continue with 2.6.
  - If the vehicle moves forward, check the entire system.
6. 2.6 Move selector lever to position "N". Check that "N" is displayed in the instrument cluster.
7. 2.7 Get another person to help you to push the vehicle for a distance of one meter.
  - If the vehicle can be moved, continue with 2.8.
  - If the vehicle cannot be moved, check the entire system.
8. 2.8 Move selector lever to position "D". Check that "D" is displayed in the instrument cluster.
  - If the vehicle moves forward, the test is complete.
  - If the vehicle does not move forward, check connecting pieces.
9. 2.9 Switch off engine.
Install engine compartment lid.
> 557819 REMOVING AND INSTALLING ENGINE COMPARTMENT LID
Install rear wall cover.
> 555919 REMOVING AND INSTALLING REAR WALL COVER
Install center console.
> 681719 REMOVING AND INSTALLING CENTRE CONSOLE