LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (34 Mechanical Transmission Actuator Housing 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 344019 - Removing And Installing Transmission Mount >> Installing Transmission Mount

Installing Transmission Mount

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screws securing gear support to transmission > Tightening torque + torque angle 30 Nm (22.1 ftlb.) + 60°. 

    Fastening screws securing transmission mount to body > Tightening torque 33 Nm (24.3 ftlb.)  .

    Fastening screw for disc valve holder > Tightening torque 13 Nm (9.6 ftlb.)  .

scientia non olet · About LEMON Manuals