Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Transmission flange to engine | Screw, M12 x 1.5 x 55- observe specified tightening sequence | Tightening torque | 85 Nm (63 ftlb.) | ||
| V strut to body | Item 2: Hexagon-head bolt M10 x 1.5 x 55/replace after every removal | Initial tightening | 35 Nm (25.8 ftlb.) | ||
| V strut to body | Item 2: Hexagon-head bolt M10 x 1.5 x 55/replace after every removal | Final tightening | + 60° |