LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (34 Mechanical Transmission Actuator Housing 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 343419 - Removing And Installing Inductive Speed Sensor >> Removing Inductive Speed Sensor

Removing Inductive Speed Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Release and disconnect electric plug connection -1-  .
  2. Unscrew and remove fastening screw -2-  .
  3. Carefully pull inductive speed sensor -3-  out of the transmission housing -arrow-  . Carefully loosen inductive speed sensor -3-  using a suitable tool if necessary.
G14946177Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals