LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (34 Mechanical Transmission Actuator Housing 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 340619 - Removing And Installing Shift Lever Bellows >> Removing And Installing Shift Lever Bellows

Removing And Installing Shift Lever Bellows

WARNING: This page is about a different variant/trim than selected.

Information 

The shift-lever knob and bellows form one unit and cannot be removed separately.

  1. Unclip retaining frame on bellows using an assembly wedge. > Unclipping retaining frame on bellows 
    G14946152Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Turn bellows anti-clockwise and remove shift-lever knob and bellows. > Removing shift-lever knob and bellows 
    G14946153Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Installation is performed in reverse order.
scientia non olet · About LEMON Manuals