LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (46 Brakes - Brake Mechanism 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 468320 Removing And Installing Parking-Brake Shoes >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install rear brake disc.

    > 465319 REMOVING AND INSTALLING REAR BRAKE DISC 

    Information 

    There is no  need to grind down the parking-brake shoes if the parking-brake shoes are not replaced.

  2. Adjust and calibrate parking-brake shoes and grind down if necessary.

    > 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES 

    NOTIFICATION 

    Removing/fitting wheels 

    • Risk of damage to (ceramic) brake discs 
      • Carefully guide the wheel towards the wheel hub, thereby preventing any heavy impact on the (ceramic) brake disc.
  3. Install wheel.

    > 440519 Removing and installing wheel

    For vehicles with PCCB:  Use assembly aids (two assembly pins) -1-  .

    G14947323Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wheel assembly pins (shown as an example)