LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (46 Brakes - Brake Mechanism 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 466219 Removing And Installing Control Unit For Parking Brake >> Removing And Installing Control Unit For Parking Brake

Removing And Installing Control Unit For Parking Brake

WARNING: This page is about a different variant/trim than selected.
  1. Unscrew nuts -2-  .
  2. Pull parking brake control unit -1-  off the studs.
    G14947311Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening parking brake control unit

  3. Release electric plug connection on parking brake control unit -1- (-arrow a-)  and disconnect it -arrow A-  .
    G14947312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing and pulling off electric plug connection

  4. Installation is performed in reverse order.
  5. Screw in and tighten nuts. > Tightening torque 4.5 Nm (3.5 ftlb.) 
scientia non olet · About LEMON Manuals