Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Tie rod (axial joint) to steering gear (rack-and-pinion) | M16x 1.5/always observe tightening specifications. | Initial tightening | 30 Nm (22 ftlb.) | ||
|
Tie rod on rack-and-pinion |
|||||
| Tie rod (axial joint) to steering gear (rack-and-pinion) | M16x 1.5/always observe tightening specifications. | Final tightening | + 23> | ||
|
Tie rod on rack-and-pinion |
|||||