LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (48 Steering 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install tie-rod ball

    > 488119 REMOVING AND INSTALLING TIE-ROD BALL (TIE-ROD END)  - article on "Removing"

  2. Install cover for front underbody

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY 1 - article on "Removing"

  3. Fit the wheel

    > 440519 REMOVING AND INSTALLING WHEEL - article on "Installing"

  4. Check the front toe and make adjustments if necessary

    > > 449503 SUSPENSION ALIGNMENT, COMPLETE

  5. Calibrate steering-angle sensor

    > 456005 INITIALIZING AND CALIBRATING PSM STEERING-ANGLE SENSOR

  6. Re-teach steering lock settings for the power-steering gear

    > 489025 PROGRAMMING POWER-STEERING GEAR 

scientia non olet · About LEMON Manuals