LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (48 Steering 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle

    > 4X00IN LIFTING THE VEHICLE

  2. Remove the relevant front wheel

    > 440519 REMOVING AND INSTALLING WHEEL - article on "Removing"

  3. Remove front underbody cover

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY - article on "Removing"

  4. Remove tie-rod ball

    > 488119 REMOVING AND INSTALLING TIE-ROD BALL (TIE-ROD END)  - article on "Removing"