Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | De | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Control arm (diagonal arm) to lower trailing arm | Hexagon head bolt, M14x 1.5 and hexagon nut | Tightening torque | 160 Nm (118 ftlb.) | ||
| Control arm (diagonal arm) with front-axle cross member to body | Hexagon-head bolt, M12x 1.5x 105/always use new bolts following removal | Initial tightening | 90 Nm (67 ftlb.) | ||
| Control arm (diagonal arm) with front-axle cross member to body | Hexagon-head bolt, M12x 1.5x 105/always use new bolts following removal | Final tightening | + 180° |