LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (40 Wheel Suspension Front Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN) >> SY, 408850 Eliminating Noise Symptoms - Reworking Front Spring-Strut Mount (Noises From Around The Dashboard/SY3015) >> Reworking Spring-Strut Mount >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove cover above the plenum panel

    > 852219 REMOVING AND INSTALLING COVER - article on "Removing"

  2. Clean the spring-strut mount if necessary.
  1. Apply grease -2-  . as shown, in the outer area of the circlip -1-  .
    G14946971Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Applying sliding compound