LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 278515 - Adjusting Distance Measuring Sensor Control Unit >> Preliminary Work >> Distance Measuring Sensor Control Unit Needs To Be Adjusted

Distance Measuring Sensor Control Unit Needs To Be Adjusted

WARNING: This page is about a different variant/trim than selected.

The distance measuring sensor control unit must be re-adjusted in the following situations:

  1. Suspension was aligned and adjusted.
  2. Distance measuring sensor (ACC sensor) control unit and/or distance measuring sensor control unit holder was removed and installed.
  3. Bumper reinforcement was loosened or removed and installed.
  4. The front end is damaged.
  5. Fault memory entry: ACC sensor incorrectly adjusted (D00004).
    1. 5.1 The misalignment angle is outside of the range -1.5° to +1.5°.
scientia non olet · About LEMON Manuals