LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (27 Starter, Power Supply, Cruise Control 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 272219 - Removing And Installing Generator >> Installing Generator

Installing Generator

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    The threaded sleeves of the generator are moved back into position by tightening the fastening screws.

    Fastening screws securing generator to crankcase/cylinder head > Tightening torque 15 Nm (11 ftlb.)  .

    Fastening nut securing B+ line to generator > Tightening torque 18 Nm (13 ftlb.)  .

scientia non olet · About LEMON Manuals