Replacing Battery
WARNING: This page is about a different variant/trim than selected.
Information
The AGM (A bsorbent G lass M at) battery is a maintenance-free, sealed battery.
- Do not open the battery. If the battery is opened, it must be replaced.
- There is a serial number -A - and a part number -B - on the top right-hand side of the battery.
- After replacing the battery, the serial number and part number as well as the battery size and manufacturer must be entered using the PIWIS Tester under: Gateway/Maintenance/repairs/Change battery.
- The battery size and battery manufacturer must also be entered when changing the battery.
- Carry out work instruction after disconnecting the battery.