Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| High-pressure pump to cylinder head | Screw, M6 x 20 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Union nut on fuel line (a/f 17) | Coat thread and cone with OKS 1710 | Tightening torque | 25 Nm (19 ftlb.) | ||
| Fuel line holder | Screw, M6 x 16 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| High-pressure sensor to fuel line | M10 x 1 - coat thread with Microgleit DF 977S (Part No. 000.04 3.209.3 5) | Tightening torque | 32.5 Nm (24 ftlb.) | +/- 2.5 Nm (2 ftlb.) | |
| Low-pressure sensor to fuel line | M10 x 1 - coat thread with Microgleit DF977 S (Part No. 000.04 3.209.3 5) | Tightening torque | 22 Nm (16 ftlb.) | +/- 2 Nm (1.5 ftlb.) | |
| Fuel collection pipe to cylinder head | Screw, M6 x 85 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Test pressure | Set on pressure reducer | Pressure | 8 bar | +/- 1 bar |