Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Turbocharger holder to bracket |
Screw, M8 x 25 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Heat shield for turbocharger/catalytic converter |
Screw, M6 x 12 - coat thread with high-temperature grease |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|