Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Exhaust manifold to cylinder head | Observe specified tightening sequence; M8 x 27 (12 ea.) | Initial tightening | 15 Nm (11 ftlb.) | ||
| Exhaust manifold to cylinder head | Observe specified tightening sequence; M8 x 27 (12 ea.) | Final tightening | + 45° | ||
| Heat shield holder to exhaust manifold flange | M8 x 20 | Tightening torque | 25 Nm (19 ftlb.) | ||
| Turbocharger to exhaust manifold | Hexagon nut, M8 - only use once | Tightening torque | 25 Nm (19 ftlb.) | +/- 10 % |