Installing Exhaust System
WARNING: This page is about a different variant/trim than selected.
- Fit new flange gaskets.
Information
- The help of another person is required when removing and installing the exhaust system.
- Fit the exhaust system with the help of another person. Position it at the holder and flanges.
- Insert new restraining straps and also secure rear silencer to the holder.
- Fit and tighten new collar nuts on the flanges.
> Tightening torque 23 Nm (17 ftlb.)
- Tighten screws on the restraining straps.
> Tightening torque 15 Nm (11.1 ftlb.)