Preliminary Work
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of injury and damage from brake fluid!
- Poisonous if swallowed!
- Irritation and damage to skin
- Avoid contact with paint surfaces
- forward Store brake fluid in suitable, labelled containers only
- forward Wear protective gloves and goggles
- forward In the event of contact (eyes or skin), wash immediately with water
- forward In the event of contact with paint surfaces, wash off immediately with water - do not wipe off
- Drain brake fluid reservoir until the brake fluid level is below the adapter (line to the clutch master cylinder).
- 1.1 Or: Pump out some of the brake fluid at the front left brake calliper.
- 1.2 To do this, open a ventilation valve (use a collecting bottle) and pump the brake pedal until the fluid level in the reservoir has dropped as required. The wheel does not need to be removed for this.
- Remove wiper linkage.
> 921919 REMOVING AND INSTALLING WIPER LINKAGE - portion on "Removing"
.