Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to anti-roll bar | Collar nut, M10/replace | Initial tightening | 40 Nm (29.5 ftlb.) | ||
| Connecting link to anti-roll bar | Collar nut, M10/replace | Final tightening | + 30° | ||
| Connecting link to wheel bearing housing | Replace M12 x 1.5/hexagon nut | Initial tightening | 50 Nm (36.9 ftlb.) | ||
| Connecting link to wheel bearing housing | Replace M12 x 1.5/hexagon nut | Final tightening | + 180° |