Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Diagonal control arm to trailing arm lower | Hexagon-head bolt, M14x 1.5 x 75 + hexagon nut | Tightening torque | 160 Nm (118 ftlb.) | ||
| Diagonal arm to body | Replace hexagon-head bolt M14x 1.5 x 95 + hexagon nut | Initial tightening | 80 Nm (59 ftlb.) | ||
| Diagonal arm to body | Replace hexagon-head bolt M14x 1.5 x 95 + hexagon nut | Final tightening | + 60° |