LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (42 Rear Wheel Suspension Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 422119 Removing And Installing Drive Shaft >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Installing rear wheel.

    > 440519 REMOVING AND INSTALLING WHEEL - portion on "Installing"

    GT4 RS: 

    > 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - portion on "Installing"

    Information 

    • The help of another person is required. 
  2. Screw on axle nut (drive shaft to wheel hub) and tighten.

    >Tightening torque 460 Nm (339.3 ftlb.) 

    To tighten the axle nut, the vehicle must be standing on its wheels and get another person to help by pressing the brake. 

scientia non olet · About LEMON Manuals