Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Steering tie rod to wheel bearing housing | Replace lock nut, M12x 1.5 | Tightening torque | 85 Nm (62.7 ftlb.) | ||
| Steering tie rod to rear axle carrier side part (toe eccentric adjuster) | Replace M12x 1.5 lock nut | Tightening torque | 110 Nm (81.1 ftlb.) |