LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (42 Rear Wheel Suspension Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 420619 Removing And Installing Rear-Axle Cross Member >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Jack and raise the vehicle at the prescribed jacking points.

    4X00IN LIFTING THE VEHICLE

  2. Remove rear underbody panelling

    >WM, 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY - portion on "Removing"

  3. Remove struts.

    421320 REMOVING AND INSTALLING STRUTS 

  4. Remove support plate.

    > 421419 REMOVING AND INSTALLING SUPPORT PLATE  - portion on "Removing"