LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (19 Engine - Cooling 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 194519 - Removing And Installing Additional Coolant Pump >> Removing And Installing Additional Coolant Pump

Removing And Installing Additional Coolant Pump

WARNING: This page is about a different variant/trim than selected.
  1. Remove additional coolant pump.
    1. 1.1 Loosen clamps -1-  and pull off coolant hoses -2-  .
    2. 1.2 Release and disconnect cable plug -3-  .
    3. 1.3 Unscrew screw -4-  and remove additional coolant pump -5-  .
    G14944181Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Additional coolant pump

  2. Installation is performed in reverse order.
    1. 2.1 Tighten screw on additional coolant pump to > Tightening torque 8 Nm (6 ftlb.)  .
scientia non olet · About LEMON Manuals