Draining Coolant At The Radiator
WARNING: This page is about a different variant/trim than selected.
WARNING:
Hot fluid
- Danger of scalding
- → Let the fluid cool down.
- → Wear personal protective gear.
WARNING:
Caustic fluids
- Danger of chemical burns
- → Wear personal protective gear.
- → Ensure that there is good ventilation.
- → Avoid contact with caustic fluid.
- → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
- Open cap -1-
on the coolant reservoir in the luggage compartment and remove it.
Coolant reservoir
- Have a suitable container ready for collecting coolant.
- Pull off coolant hose -3-
.
- 3.1 Loosen spring clamp on the plug-in coupling.
- 3.2 Pull off coolant hose -3- and collect emerging coolant.
- 3.3 Re-fit spring clamp, but do not connect coolant hose yet.
Supply and return hose connections (side radiator)
- Replace O-ring.
- Coat new O-ring with the specified lubricant.
- Fit coolant hose and pull on the hose to check that it is secure.