Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oxygen sensor downstream of catalytic converter | Grease thread with the prescribed lubricant during reinstallation | Tightening torque | 50 Nm (37 ftlb.) | +/- 8 Nm (6 ftlb.) | |
| Oxygen sensor to catalytic converter | Grease thread with the prescribed lubricant during reinstallation | Tightening torque using the prescribed tool | 46 Nm (34 ftlb.) | ||
| Screw for differential pressure sensor line | Tightening torque | 6 Nm (4.5 ftlb.) | |||
| Union nuts on differential pressure sensor lines | Initial tightening | Tightening torque | 12 Nm (9 ftlb.) | ||
| Union nuts on differential pressure sensor lines | Final tightening | Torque angle | + 90° | ||
| Nuts on differential pressure sensor lines | Tightening torque | 6 Nm (4.5 ftlb.) |