LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (13 Engine - Crank Drive, Pistons 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 137519 - Removing And Installing Vibration Damper (2.0 L) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove rear wall cover.

    > 555919 REMOVING AND INSTALLING REAR WALL COVER

  2. Loosen drive belt and remove it from the vibration damper.

    > 137819 REMOVING AND INSTALLING DRIVE BELT 

  3. Remove catalytic converter.

    > 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER (NOT VTG_ATL)

  4. Remove heat shield.

    > 261219 REMOVING AND INSTALLING HEAT SHIELD

scientia non olet · About LEMON Manuals