Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Coolant pipe to housing | External Torx, M6 x 20 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Coolant pipe to crankcase | Screw, M6 x 12 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Heat shield on coolant pump | Screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Upper part of oil pan to crankcase | Internal Torx, M6 x 25 (10.9) | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Bulkhead box to oil pan (with oil drain) | Screw, M6 x 16 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Oil pressure pipe to crankcase and oil pump | Torx screw, M6 x 16 (10.9) | Tightening torque | 13 Nm (9.5 ftlb.) |