LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (17 Engine - Lubrication 2.0L -- 982 - BOXSTER/CAYMAN) >> WM, 170419 - Removing And Installing Oil-Pressure Sender >> Installing Oil-Pressure Sender

Installing Oil-Pressure Sender

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.
  2. Replace sealing ring on oil-pressure sender.
  3. Tighten oil-pressure sender using the specified tool.

    > Initial tightening 2.5 Nm (2 ftlb.) 

    > Torque angle 85° 

scientia non olet · About LEMON Manuals