Removing Rear Logo

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Not for PORSCHE logo.

The logo is replaced together with the trim.

Information 

Logos cannot be re-used.

1. Heat the area -1-  around the logo -2-  using the > V.A.G 1416 - Hot-Air Blower-3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Prise off the logo using a plastic spatula.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

3. Remove residual adhesive -1-  around the logo -2-  using silicone remover.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.