LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 217319 - Removing And Installing Turbocharger Vent Line >> Installing Turbocharger Vent Line

Installing Turbocharger Vent Line

  1. Install turbocharger vent line -1  -.
    1. 1.1 Coat new O-rings with grease.
    2. 1.2 Place vent line -1  - in installation position.
    3. 1.3 Tighten screws -2  - on the vent line connections to > Tightening torque 10 Nm (7.5 ftlb.)  .
    4. 1.4 Tighten screw -3  - on vent line holder to > Tightening torque 10 Nm (7.5 ftlb.)  .
    5. 1.5 Insert electric line holder -4  - into vent line holder.
    G14945206Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals