Removing And Installing Suction Fan For Backrest Surface

1. Swivel lumbar support -1-  up -arrow A-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Folding lumbar support out of the way

2. Cut tie-wrap -1-  and disconnect electric plug connection -2-  (-arrow A-  ).

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pulling off electric plug connection

3. Unscrew screws -2-  , guide the suction fan for the backrest surface -1-  upwards -arrow A-  and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing suction fan