LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 214219 - Removing And Installing Holder For Charge Air Cooler >> Install Holder For Charge Air Cooler

Install Holder For Charge Air Cooler

  1. Installation is performed in reverse order to removal.

    Screws for holder for charge-air cooler, M6: > Tightening torque 10 Nm  .

    M6 nut: > Tightening torque 6 Nm 

scientia non olet · About LEMON Manuals