General Warning Notes
WARNING:
Installation of brake pads with the wrong brake pad quality
- Longer braking distance
- More wear on brake pads
- Only use the type-specific brake pads listed in the Porsche Parts Information.
- Replace brake pads on both sides of axle when the brake pad wear indicator light comes on.
Information
Checking thickness of brake pads
- If brake pad wear is indicated by the warning light, the warning contact (sender including wire and plug connection) must be replaced.
- Replacement of the warning contact can be avoided by replacing the brake pads before a pad thickness -Arrows- of 2.5 mm is reached.
- Warning contacts must be replaced if the core of the wire is worn.
- If only the plastic part of the warning contact is worn, the warning contacts can be re-used.